Free heart SVG

Interlocking hearts SVG

Interlocking hearts, drawn as a line
Interlocking hearts. The preview is the SVG file itself.

Two heart outlines tilted apart and linked where their inner lobes cross, welded into one piece. Made for weddings, anniversaries and engagement cards.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 55 mm (3.94 × 2.15 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length625 mm at this size
Narrowest part4.5 mm at this size
Nodes72 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,129 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)1.1 mm159 mm160Vinyl, card and thin sheet
2 × 1.09 in (51 × 28 mm)2.3 mm318 mm45Vinyl, card and thin sheet
3 × 1.64 in (76 × 42 mm)3.4 mm476 mm18Any material, including 3 mm wood and acrylic
4 × 2.19 in (102 × 56 mm)4.6 mm635 mm10Any material, including 3 mm wood and acrylic
6 × 3.28 in (152 × 83 mm)6.9 mm952 mm3Any material, including 3 mm wood and acrylic
8 × 4.38 in (203 × 111 mm)9.1 mm1,270 mm2Any material, including 3 mm wood and acrylic
12 × 6.56 in (305 × 167 mm)14 mm1,905 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More heart SVG files

← Heart with an arrow through it All 25 hearts Two hearts overlapping →