Lace heart with a scalloped edge SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A heart edged with pierced scallops, with a ring of teardrop cut-outs inside and a small heart window at the centre, like a paper doily. Cut it at 80 mm or more so the eyelets stay clean.
What is in the file
| Size | 100 × 92 mm (3.94 × 3.61 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 59: 1 outer edge and 58 cut-outs |
| Cut length | 1,267 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 372 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,838 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.92 in (25 × 23 mm) | 0.25 mm | 322 mm | 100 | Too fine for most machines |
| 2 × 1.83 in (51 × 47 mm) | 0.51 mm | 644 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.75 in (76 × 70 mm) | 0.76 mm | 965 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.66 in (102 × 93 mm) | 1 mm | 1,287 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.5 in (152 × 140 mm) | 1.5 mm | 1,931 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.33 in (203 × 186 mm) | 2 mm | 2,575 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.99 in (305 × 279 mm) | 3 mm | 3,862 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.