Free haunted house SVG

Haunted house in a round frame SVG

Haunted house in a round frame. The preview is the SVG file itself.

The house on its hill set inside a ring, with the tower and the bare tree reaching up to the frame. A round design for stickers, coasters, cake toppers and trick or treat tags.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	39: 1 outer edge and 38 cut-outs
Cut length	1,282 mm at this size
Narrowest part	1.3 mm at this size
Nodes	484 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.33 mm	326 mm	100	Too fine for most machines
2 × 2 in (51 × 51 mm)	0.66 mm	651 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)	0.99 mm	977 mm	9	Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)	1.3 mm	1,303 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	2 mm	1,954 mm	1	Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)	2.6 mm	2,605 mm	1	Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)	4 mm	3,908 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More haunted house SVG files

← Haunted forest All 12 haunted houses Haunted house gate →