Free haunted house SVG

Haunted house outline SVG

Haunted house outline, drawn as a line
Haunted house outline. The preview is the SVG file itself.

The leaning house as a line drawing: walls, bent roof, chimney and porch, with each window and the door drawn as a frame that joins a line of boards across the wall. For colouring pages and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size64 × 100 mm (2.5 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,063 mm at this size
Narrowest part1.9 mm at this size
Nodes412 curve and line segments

Measured from the file. PNG: 1,298 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.64 × 1 in (16 × 25 mm)0.48 mm270 mm140Too fine for most machines
1.27 × 2 in (32 × 51 mm)0.97 mm540 mm40Fine detail: vinyl and paper only, weed with care
1.9 × 3 in (48 × 76 mm)1.4 mm810 mm15Vinyl, card and thin sheet
2.54 × 4 in (65 × 102 mm)1.9 mm1,080 mm8Vinyl, card and thin sheet
3.81 × 6 in (97 × 152 mm)2.9 mm1,620 mm3Vinyl, card and thin sheet
5.08 × 8 in (129 × 203 mm)3.9 mm2,160 mm2Any material, including 3 mm wood and acrylic
7.62 × 12 in (194 × 305 mm)5.8 mm3,240 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More haunted house SVG files

← Haunted street of three houses All 12 haunted houses Haunted house on a hill →