Free haunted house SVG

Haunted house on a hill SVG

Haunted house on a hill, as a solid black shape — Haunted house on a hill. The preview is the SVG file itself.

A rambling old house on a hill: a main block with a steep gable, a tower with a pointed roof, a low wing and a crooked chimney, a bare tree to one side and a fence to the other. Every window is cut out with its bars left in.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 82 mm (3.94 × 3.24 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	43: 1 outer edge and 42 cut-outs
Cut length	1,051 mm at this size
Narrowest part	1.2 mm at this size
Nodes	566 curve and line segments

Measured from the file. PNG: 2,000 × 1,660 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	0.3 mm	267 mm	110	Too fine for most machines
2 × 1.65 in (51 × 42 mm)	0.61 mm	534 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.47 in (76 × 63 mm)	0.91 mm	801 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.29 in (102 × 84 mm)	1.2 mm	1,068 mm	6	Vinyl, card and thin sheet
6 × 4.94 in (152 × 125 mm)	1.8 mm	1,602 mm	2	Vinyl, card and thin sheet
8 × 6.58 in (203 × 167 mm)	2.4 mm	2,136 mm	1	Vinyl, card and thin sheet
12 × 9.88 in (305 × 251 mm)	3.7 mm	3,203 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More haunted house SVG files

← Haunted house outline All 12 haunted houses Haunted house silhouette →