Free haunted house SVG

Cute haunted house with a face SVG

Cute haunted house with a face, as a solid black shape
Cute haunted house with a face. The preview is the SVG file itself.

A friendly little haunted house whose two arched windows are eyes and whose door is a grinning mouth with teeth, under a floppy roof with a chimney. For young trick or treaters and classroom doors.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size85 × 100 mm (3.35 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length737 mm at this size
Narrowest part3.8 mm at this size
Nodes204 curve and line segments

Measured from the file. PNG: 1,712 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.85 × 1 in (22 × 25 mm)0.97 mm187 mm110Fine detail: vinyl and paper only, weed with care
1.7 × 2 in (43 × 51 mm)1.9 mm374 mm30Vinyl, card and thin sheet
2.55 × 3 in (65 × 76 mm)2.9 mm562 mm12Vinyl, card and thin sheet
3.4 × 4 in (86 × 102 mm)3.9 mm749 mm6Any material, including 3 mm wood and acrylic
5.1 × 6 in (130 × 152 mm)5.8 mm1,123 mm2Any material, including 3 mm wood and acrylic
6.8 × 8 in (173 × 203 mm)7.7 mm1,498 mm1Any material, including 3 mm wood and acrylic
10.2 × 12 in (259 × 305 mm)12 mm2,246 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More haunted house SVG files

← Haunted house gate All 12 haunted houses Haunted house with a ghost in the chimney →