Free haunted house SVG

Haunted house with a ghost in the chimney SVG

Haunted house with a ghost in the chimney, as a solid black shape
Haunted house with a ghost in the chimney. The preview is the SVG file itself.

The leaning house with a large ghost pouring out of its chimney and curling over the roof, arms out. House and ghost are one piece, and the ghost has two eyes and a mouth.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size74 × 100 mm (2.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut25: 1 outer edge and 24 cut-outs
Cut length701 mm at this size
Narrowest part1.4 mm at this size
Nodes283 curve and line segments

Measured from the file. PNG: 1,506 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.74 × 1 in (19 × 25 mm)0.36 mm178 mm120Too fine for most machines
1.49 × 2 in (38 × 51 mm)0.71 mm356 mm35Fine detail: vinyl and paper only, weed with care
2.23 × 3 in (57 × 76 mm)1.1 mm534 mm15Vinyl, card and thin sheet
2.97 × 4 in (75 × 102 mm)1.4 mm712 mm6Vinyl, card and thin sheet
4.46 × 6 in (113 × 152 mm)2.1 mm1,068 mm2Vinyl, card and thin sheet
5.94 × 8 in (151 × 203 mm)2.8 mm1,424 mm1Vinyl, card and thin sheet
8.92 × 12 in (226 × 305 mm)4.3 mm2,137 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More haunted house SVG files

← Cute haunted house with a face All 12 haunted houses Haunted street of three houses →