Free gnome SVG

Gnome hat SVG

Gnome hat, as a solid black shape
Gnome hat. The preview is the SVG file itself.

The hat on its own: a tall cone with a bent tip, a ribbed cuff, two stripes and a star. Put it on a pet, a photo, a letter or a pumpkin.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size76 × 100 mm (2.98 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length632 mm at this size
Narrowest part4.3 mm at this size
Nodes188 curve and line segments

Measured from the file. PNG: 1,533 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.76 × 1 in (19 × 25 mm)1.1 mm161 mm120Vinyl, card and thin sheet
1.51 × 2 in (38 × 51 mm)2.2 mm321 mm35Vinyl, card and thin sheet
2.27 × 3 in (58 × 76 mm)3.3 mm482 mm12Any material, including 3 mm wood and acrylic
3.03 × 4 in (77 × 102 mm)4.4 mm642 mm6Any material, including 3 mm wood and acrylic
4.54 × 6 in (115 × 152 mm)6.6 mm963 mm2Any material, including 3 mm wood and acrylic
6.06 × 8 in (154 × 203 mm)8.7 mm1,284 mm1Any material, including 3 mm wood and acrylic
9.08 × 12 in (231 × 305 mm)13 mm1,926 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gnome SVG files

← Gnome with a monogram window All 16 gnomes Scandinavian gnome →