Free gnome SVG

Christmas gnome with a present SVG

Christmas gnome with a present, as a solid black shape
Christmas gnome with a present. The preview is the SVG file itself.

A gnome in a hat of cut-out stars with a bobble on its tip, standing beside a wrapped present with a bow. The ribbon on the box is cut as thin lines.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size58 × 100 mm (2.3 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length611 mm at this size
Narrowest part1.7 mm at this size
Nodes288 curve and line segments

Measured from the file. PNG: 1,198 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.58 × 1 in (15 × 25 mm)0.43 mm155 mm150Too fine for most machines
1.17 × 2 in (30 × 51 mm)0.86 mm310 mm40Fine detail: vinyl and paper only, weed with care
1.75 × 3 in (44 × 76 mm)1.3 mm466 mm18Vinyl, card and thin sheet
2.33 × 4 in (59 × 102 mm)1.7 mm621 mm8Vinyl, card and thin sheet
3.5 × 6 in (89 × 152 mm)2.6 mm931 mm3Vinyl, card and thin sheet
4.66 × 8 in (118 × 203 mm)3.5 mm1,242 mm2Any material, including 3 mm wood and acrylic
7 × 12 in (178 × 305 mm)5.2 mm1,862 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gnome SVG files

← Scandinavian gnome All 16 gnomes Santa gnome →