Free gnome SVG

Halloween gnome in a witch hat SVG

Halloween gnome in a witch hat, as a solid black shape — Halloween gnome in a witch hat. The preview is the SVG file itself.

A gnome in a wide-brimmed witch hat with a buckled band, holding a broom. The brim hides his eyes just as his usual hat does.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	71 × 100 mm (2.8 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	700 mm at this size
Narrowest part	2.6 mm at this size
Nodes	224 curve and line segments

Measured from the file. PNG: 1,444 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.71 × 1 in (18 × 25 mm)	0.66 mm	178 mm	130	Fine detail: vinyl and paper only, weed with care
1.42 × 2 in (36 × 51 mm)	1.3 mm	356 mm	35	Vinyl, card and thin sheet
2.13 × 3 in (54 × 76 mm)	2 mm	533 mm	15	Vinyl, card and thin sheet
2.84 × 4 in (72 × 102 mm)	2.6 mm	711 mm	8	Vinyl, card and thin sheet
4.27 × 6 in (108 × 152 mm)	4 mm	1,067 mm	2	Any material, including 3 mm wood and acrylic
5.69 × 8 in (144 × 203 mm)	5.3 mm	1,422 mm	2	Any material, including 3 mm wood and acrylic
8.53 × 12 in (217 × 305 mm)	7.9 mm	2,134 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gnome SVG files

← Fall gnome with a pumpkin All 16 gnomes Garden gnome with a flower →