Free gnome SVG

Santa gnome SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa gnome, as a solid black shape
Santa gnome. The preview is the SVG file itself.

A gnome in a Santa hat: the hat folds over and ends in a ball, with a band of fur tufts along its edge, over a full scalloped beard.

What is in the file

Size74 × 100 mm (2.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length571 mm at this size
Narrowest part1.3 mm at this size
Nodes191 curve and line segments

Measured from the file. PNG: 1,508 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.74 × 1 in (19 × 25 mm)0.33 mm145 mm120Too fine for most machines
1.49 × 2 in (38 × 51 mm)0.66 mm290 mm35Fine detail: vinyl and paper only, weed with care
2.23 × 3 in (57 × 76 mm)0.99 mm435 mm15Fine detail: vinyl and paper only, weed with care
2.98 × 4 in (76 × 102 mm)1.3 mm580 mm6Vinyl, card and thin sheet
4.46 × 6 in (113 × 152 mm)2 mm870 mm2Vinyl, card and thin sheet
5.95 × 8 in (151 × 203 mm)2.6 mm1,160 mm1Vinyl, card and thin sheet
8.93 × 12 in (227 × 305 mm)4 mm1,740 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gnome SVG files

← Christmas gnome with a present All 16 gnomes Valentine gnome with a heart balloon →