Free gear SVG

Clock wheel with four crossings SVG

Clock wheel with four crossings. The preview is the SVG file itself.

Forty slim teeth on a narrow rim, four slender arms and a small hub: the pattern of the brass wheels inside a clock. Light and open.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	1,182 mm at this size
Narrowest part	3.4 mm at this size
Nodes	434 curve and line segments
Symmetry	4-fold rotation and mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.86 mm	300 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.7 mm	600 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.6 mm	901 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	3.5 mm	1,201 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	5.2 mm	1,801 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	6.9 mm	2,402 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	10 mm	3,603 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gear SVG files

← Fine gear with forty-eight teeth All 15 gears Internal gear ring →