Free gear SVG

Two gears in mesh SVG

Two gears in mesh, as a solid black shape — Two gears in mesh. The preview is the SVG file itself.

A twenty-tooth gear driving a ten-tooth pinion, drawn in true mesh with a little play between the teeth. Two separate pieces that keep their spacing on transfer tape.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.72 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	10: 2 outer edges and 8 cut-outs
Cut length	859 mm at this size
Narrowest part	5.4 mm at this size
Nodes	384 curve and line segments

Measured from the file. PNG: 2,000 × 1,408 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 18 mm)	1.4 mm	218 mm	130	Vinyl, card and thin sheet
2 × 1.38 in (51 × 35 mm)	2.7 mm	436 mm	35	Vinyl, card and thin sheet
3 × 2.08 in (76 × 53 mm)	4.1 mm	655 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.77 in (102 × 70 mm)	5.5 mm	873 mm	8	Any material, including 3 mm wood and acrylic
6 × 4.15 in (152 × 105 mm)	8.2 mm	1,309 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.54 in (203 × 141 mm)	11 mm	1,745 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.3 in (305 × 211 mm)	16 mm	2,618 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gear SVG files

← Gear outline All 15 gears Three gears in mesh →