Free gear SVG

Gear cluster, welded SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Gear cluster, welded, as a solid black shape
Gear cluster, welded. The preview is the SVG file itself.

Five gears of four sizes pushed together until their teeth lock and weld, so the whole group cuts as a single piece. For steampunk designs, wood and metal.

What is in the file

Size100 × 97 mm (3.94 × 3.8 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut27: 1 outer edge and 26 cut-outs
Cut length1,140 mm at this size
Narrowest part1 mm at this size
Nodes644 curve and line segments

Measured from the file. PNG: 2,000 × 1,933 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.25 mm290 mm100Too fine for most machines
2 × 1.93 in (51 × 49 mm)0.51 mm579 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.89 in (76 × 74 mm)0.76 mm869 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.86 in (102 × 98 mm)1 mm1,158 mm6Vinyl, card and thin sheet
6 × 5.79 in (152 × 147 mm)1.5 mm1,737 mm2Vinyl, card and thin sheet
8 × 7.72 in (203 × 196 mm)2 mm2,316 mm1Vinyl, card and thin sheet
12 × 11.58 in (305 × 294 mm)3 mm3,475 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gear SVG files

← Three gears in mesh All 15 gears Rack and pinion →