Free gear SVG

Three gears in mesh SVG

Three gears in mesh, as a solid black shape — Three gears in mesh. The preview is the SVG file itself.

Gears of eighteen, twelve and nine teeth, all the same tooth size and set so each tooth meets a gap. Three separate pieces, as real gears are.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	92 × 100 mm (3.62 × 3.94 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	17: 3 outer edges and 14 cut-outs
Cut length	1,032 mm at this size
Narrowest part	4.1 mm at this size
Nodes	489 curve and line segments

Measured from the file. PNG: 1,846 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.92 × 1 in (23 × 25 mm)	1 mm	262 mm	100	Vinyl, card and thin sheet
1.84 × 2 in (47 × 51 mm)	2.1 mm	524 mm	25	Vinyl, card and thin sheet
2.76 × 3 in (70 × 76 mm)	3.1 mm	786 mm	12	Any material, including 3 mm wood and acrylic
3.68 × 4 in (93 × 102 mm)	4.2 mm	1,049 mm	6	Any material, including 3 mm wood and acrylic
5.52 × 6 in (140 × 152 mm)	6.2 mm	1,573 mm	2	Any material, including 3 mm wood and acrylic
7.36 × 8 in (187 × 203 mm)	8.3 mm	2,097 mm	1	Any material, including 3 mm wood and acrylic
11.04 × 12 in (280 × 305 mm)	12 mm	3,146 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gear SVG files

← Two gears in mesh All 15 gears Gear cluster, welded →