Gear ring frame SVG
Thirty-six teeth on a narrow ring with a wide open middle, about 79 mm across, for a monogram, a photo or a clock face.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 859 mm at this size |
| Narrowest part | 4.6 mm at this size |
| Nodes | 395 curve and line segments |
| Symmetry | 36-fold rotation and mirror |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 1.2 mm | 218 mm | 100 | Vinyl, card and thin sheet |
| 2 × 2 in (51 × 51 mm) | 2.3 mm | 436 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 3.5 mm | 655 mm | 9 | Any material, including 3 mm wood and acrylic |
| 4 × 4 in (102 × 102 mm) | 4.7 mm | 873 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 6 in (152 × 152 mm) | 7 mm | 1,309 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 9.3 mm | 1,745 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 14 mm | 2,618 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Chain sprocket 
Gear outline 
Two gears in mesh 
Three gears in mesh 
Gear cluster, welded 
Rack and pinion 
Gear with twelve teeth 
Gear icon with eight teeth 