Free flower SVG

Line drawing of a flower with stem SVG

Line drawing of a flower with stem, drawn as a line
Line drawing of a flower with stem. The preview is the SVG file itself.

A blossom, stem and two leaves drawn with one even line, 1.8 mm wide. Made for pen plotters, engraving and single-line style decals.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size43 × 100 mm (1.71 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length840 mm at this size
Narrowest part1.8 mm at this size
Nodes219 curve and line segments

Measured from the file. PNG: 912 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.43 × 1 in (11 × 25 mm)0.46 mm213 mm190Too fine for most machines
0.87 × 2 in (22 × 51 mm)0.91 mm427 mm55Fine detail: vinyl and paper only, weed with care
1.3 × 3 in (33 × 76 mm)1.4 mm640 mm24Vinyl, card and thin sheet
1.74 × 4 in (44 × 102 mm)1.8 mm853 mm12Vinyl, card and thin sheet
2.6 × 6 in (66 × 152 mm)2.7 mm1,280 mm4Vinyl, card and thin sheet
3.47 × 8 in (88 × 203 mm)3.7 mm1,707 mm3Any material, including 3 mm wood and acrylic
5.21 × 12 in (132 × 305 mm)5.5 mm2,560 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flower SVG files

← Flower outline with overlapping petals All 26 flowers Flower mandala in line →