Free flower SVG

Layered blossom in five colours SVG

Layered blossom in five colours, in layered colours
Layered blossom in five colours. The preview is the SVG file itself.

Five layers to cut in different colours and stack: three leaves at the back, three rings of notched petals and a round centre. Foam pads between the layers give it depth.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size97 × 100 mm (3.83 × 3.94 in), scales to any size
Pieces5 separate pieces
Outlines to cut7: 5 outer edges and 2 cut-outs
Cut length1,198 mm at this size
Narrowest part6 mm at this size
Nodes253 curve and line segments
SymmetryMirror
Layers5: leaves, back petals, middle petals, front petals and centre

Measured from the file. PNG: 1,946 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)1.5 mm304 mm100Vinyl, card and thin sheet
1.94 × 2 in (49 × 51 mm)3 mm609 mm25Any material, including 3 mm wood and acrylic
2.92 × 3 in (74 × 76 mm)4.6 mm913 mm9Any material, including 3 mm wood and acrylic
3.89 × 4 in (99 × 102 mm)6.1 mm1,217 mm4Any material, including 3 mm wood and acrylic
5.83 × 6 in (148 × 152 mm)9.1 mm1,826 mm2Any material, including 3 mm wood and acrylic
7.78 × 8 in (198 × 203 mm)12 mm2,434 mm1Any material, including 3 mm wood and acrylic
11.66 × 12 in (296 × 305 mm)18 mm3,652 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flower SVG files

← Paper flower centres in three layers All 26 flowers Three wildflowers on stems →