Free flower SVG

Flower outline with overlapping petals SVG

Flower outline with overlapping petals, drawn as a line
Flower outline with overlapping petals. The preview is the SVG file itself.

Six petals drawn in line, each tucked under the next the way real petals overlap, around a small ring. It turns one way, so flip it for a matched pair.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size93 × 100 mm (3.67 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length1,112 mm at this size
Narrowest part1.8 mm at this size
Nodes93 curve and line segments
Symmetry6-fold rotation

Measured from the file. PNG: 1,871 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.93 × 1 in (24 × 25 mm)0.46 mm282 mm100Too fine for most machines
1.87 × 2 in (47 × 51 mm)0.91 mm565 mm25Fine detail: vinyl and paper only, weed with care
2.8 × 3 in (71 × 76 mm)1.4 mm847 mm12Vinyl, card and thin sheet
3.73 × 4 in (95 × 102 mm)1.8 mm1,130 mm6Vinyl, card and thin sheet
5.6 × 6 in (142 × 152 mm)2.7 mm1,695 mm2Vinyl, card and thin sheet
7.46 × 8 in (190 × 203 mm)3.7 mm2,260 mm1Any material, including 3 mm wood and acrylic
11.2 × 12 in (284 × 305 mm)5.5 mm3,389 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flower SVG files

← Five-petal flower outline All 26 flowers Line drawing of a flower with stem →