Free flower SVG

Flower mandala in line SVG

Flower mandala in line, drawn as a line
Flower mandala in line. The preview is the SVG file itself.

Four rings of petals around a small centre, drawn as a line about 1.8 mm wide with every ring tucked behind the one inside it. Sixteen-fold at the rim, eight-fold within.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut50: 1 outer edge and 49 cut-outs
Cut length2,441 mm at this size
Narrowest part1.8 mm at this size
Nodes406 curve and line segments
Symmetry8-fold rotation and mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.46 mm620 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.91 mm1,240 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)1.4 mm1,860 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)1.8 mm2,480 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)2.7 mm3,720 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)3.7 mm4,960 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)5.5 mm7,440 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flower SVG files

← Line drawing of a flower with stem All 26 flowers Flower stencil plate →