Free flamingo SVG

Split flamingo for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Split flamingo for a name, as a solid black shape
Split flamingo for a name. The preview is the SVG file itself.

The flamingo cut in two across its body, leaving a clear band about 11 mm tall for a name. The two halves are separate pieces by design: line them up either side of your lettering.

What is in the file

Size66 × 100 mm (2.59 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut5: 2 outer edges and 3 cut-outs
Cut length495 mm at this size
Narrowest part1 mm at this size
Nodes154 curve and line segments

Measured from the file. PNG: 1,344 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.66 × 1 in (17 × 25 mm)0.25 mm126 mm140Too fine for most machines
1.32 × 2 in (33 × 51 mm)0.51 mm251 mm40Fine detail: vinyl and paper only, weed with care
1.98 × 3 in (50 × 76 mm)0.76 mm377 mm15Fine detail: vinyl and paper only, weed with care
2.64 × 4 in (67 × 102 mm)1 mm503 mm8Vinyl, card and thin sheet
3.95 × 6 in (100 × 152 mm)1.5 mm754 mm2Vinyl, card and thin sheet
5.27 × 8 in (134 × 203 mm)2 mm1,006 mm2Vinyl, card and thin sheet
7.91 × 12 in (201 × 305 mm)3 mm1,509 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flamingo SVG files

← Mandala flamingo All 12 flamingos Flamingo outline →