Free flamingo SVG

Christmas flamingo in a Santa hat SVG

Christmas flamingo in a Santa hat, as a solid black shape
Christmas flamingo in a Santa hat. The preview is the SVG file itself.

The standing flamingo in a Santa hat with a floppy point and a bobble. A warm-weather Christmas design for cards, shirts and tree decorations.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size56 × 100 mm (2.22 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length558 mm at this size
Narrowest part1.5 mm at this size
Nodes199 curve and line segments

Measured from the file. PNG: 1,160 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.56 × 1 in (14 × 25 mm)0.38 mm142 mm150Too fine for most machines
1.13 × 2 in (29 × 51 mm)0.76 mm283 mm45Fine detail: vinyl and paper only, weed with care
1.69 × 3 in (43 × 76 mm)1.1 mm425 mm18Vinyl, card and thin sheet
2.25 × 4 in (57 × 102 mm)1.5 mm567 mm8Vinyl, card and thin sheet
3.38 × 6 in (86 × 152 mm)2.3 mm850 mm3Vinyl, card and thin sheet
4.5 × 8 in (114 × 203 mm)3 mm1,134 mm2Any material, including 3 mm wood and acrylic
6.76 × 12 in (172 × 305 mm)4.6 mm1,701 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flamingo SVG files

← Flamingo and palm tree All 12 flamingos Cute flamingo with a heart →