Free flamingo SVG

Flamingo outline SVG

Flamingo outline, drawn as a line
Flamingo outline. The preview is the SVG file itself.

The flamingo as one even line with a solid beak tip, solid legs and two wing lines. For colouring pages, engraving, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size66 × 100 mm (2.6 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length818 mm at this size
Narrowest part1.8 mm at this size
Nodes209 curve and line segments

Measured from the file. PNG: 1,346 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.66 × 1 in (17 × 25 mm)0.46 mm208 mm140Too fine for most machines
1.32 × 2 in (34 × 51 mm)0.91 mm416 mm40Fine detail: vinyl and paper only, weed with care
1.98 × 3 in (50 × 76 mm)1.4 mm623 mm15Vinyl, card and thin sheet
2.64 × 4 in (67 × 102 mm)1.8 mm831 mm8Vinyl, card and thin sheet
3.96 × 6 in (101 × 152 mm)2.7 mm1,247 mm2Vinyl, card and thin sheet
5.28 × 8 in (134 × 203 mm)3.7 mm1,662 mm2Any material, including 3 mm wood and acrylic
7.92 × 12 in (201 × 305 mm)5.5 mm2,493 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flamingo SVG files

← Split flamingo for a name All 12 flamingos Layered pink flamingo in four colours →