Free flamingo SVG

Flamingo standing on one leg SVG

Flamingo standing on one leg, as a solid black shape
Flamingo standing on one leg. The preview is the SVG file itself.

A flamingo standing on one leg with the other folded up, its neck in an S, a heavy bent beak with the dark tip marked by a cut line, and three wing feathers. The one to start with.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size66 × 100 mm (2.6 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length563 mm at this size
Narrowest part1.8 mm at this size
Nodes205 curve and line segments

Measured from the file. PNG: 1,346 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.66 × 1 in (17 × 25 mm)0.46 mm143 mm140Too fine for most machines
1.32 × 2 in (34 × 51 mm)0.91 mm286 mm40Fine detail: vinyl and paper only, weed with care
1.98 × 3 in (50 × 76 mm)1.4 mm429 mm15Vinyl, card and thin sheet
2.64 × 4 in (67 × 102 mm)1.8 mm572 mm8Vinyl, card and thin sheet
3.96 × 6 in (101 × 152 mm)2.7 mm858 mm2Vinyl, card and thin sheet
5.28 × 8 in (134 × 203 mm)3.7 mm1,144 mm2Any material, including 3 mm wood and acrylic
7.92 × 12 in (201 × 305 mm)5.5 mm1,716 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flamingo SVG files

← Layered pink flamingo in four colours All 12 flamingos Flamingo silhouette →