Free firefighter SVG

Firefighter helmet with crossed axes SVG

Firefighter helmet with crossed axes, as a solid black shape — Firefighter helmet with crossed axes. The preview is the SVG file itself.

The helmet seen from the front with two axes crossed behind it, heads above the brim and handles below. A thin gap round the helmet keeps it clear of the axes.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.82 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	18: 1 outer edge and 17 cut-outs
Cut length	884 mm at this size
Narrowest part	1.6 mm at this size
Nodes	192 curve and line segments

Measured from the file. PNG: 2,000 × 1,456 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	0.41 mm	225 mm	130	Too fine for most machines
2 × 1.43 in (51 × 36 mm)	0.81 mm	449 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.15 in (76 × 55 mm)	1.2 mm	674 mm	15	Vinyl, card and thin sheet
4 × 2.87 in (102 × 73 mm)	1.6 mm	898 mm	6	Vinyl, card and thin sheet
6 × 4.3 in (152 × 109 mm)	2.4 mm	1,347 mm	2	Vinyl, card and thin sheet
8 × 5.74 in (203 × 146 mm)	3.3 mm	1,796 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.6 in (305 × 219 mm)	4.9 mm	2,694 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firefighter SVG files

← Firefighter badge with crossed axes All 14 firefighters Firefighter monogram frame →