Free firefighter SVG

Firefighter helmet from the side SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Firefighter helmet from the side, as a solid black shape
Firefighter helmet from the side. The preview is the SVG file itself.

The same helmet in side view: a short peak at the front, the long tail that sheds water down the back, two ridges on the crown and the blank plate leaning on the front.

What is in the file

Size100 × 65 mm (3.94 × 2.55 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length594 mm at this size
Narrowest part1.7 mm at this size
Nodes100 curve and line segments
Also found asFireman hat SVG

Measured from the file. PNG: 2,000 × 1,321 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.43 mm151 mm140Too fine for most machines
2 × 1.29 in (51 × 33 mm)0.86 mm302 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)1.3 mm453 mm15Vinyl, card and thin sheet
4 × 2.59 in (102 × 66 mm)1.7 mm604 mm8Vinyl, card and thin sheet
6 × 3.88 in (152 × 99 mm)2.6 mm905 mm2Vinyl, card and thin sheet
8 × 5.18 in (203 × 131 mm)3.5 mm1,207 mm2Any material, including 3 mm wood and acrylic
12 × 7.76 in (305 × 197 mm)5.2 mm1,811 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firefighter SVG files

← Firefighter helmet from the front All 14 firefighters Firefighter axe →