Free firefighter SVG

Firefighter fire engine SVG

Firefighter fire engine, as a solid black shape — Firefighter fire engine. The preview is the SVG file itself.

A fire engine from the side: a cab with a light bar, a ladder racked along the top, three lockers, two pump outlets and a stripe along the body. The wheels are welded on under arch lines that stop short.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 52 mm (3.94 × 2.05 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	34: 1 outer edge and 33 cut-outs
Cut length	1,013 mm at this size
Narrowest part	2.1 mm at this size
Nodes	214 curve and line segments

Measured from the file. PNG: 2,000 × 1,079 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.52 in (25 × 13 mm)	0.53 mm	257 mm	160	Fine detail: vinyl and paper only, weed with care
2 × 1.04 in (51 × 26 mm)	1.1 mm	515 mm	45	Vinyl, card and thin sheet
3 × 1.56 in (76 × 40 mm)	1.6 mm	772 mm	18	Vinyl, card and thin sheet
4 × 2.08 in (102 × 53 mm)	2.1 mm	1,029 mm	10	Vinyl, card and thin sheet
6 × 3.13 in (152 × 79 mm)	3.2 mm	1,544 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.17 in (203 × 106 mm)	4.3 mm	2,058 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.25 in (305 × 159 mm)	6.4 mm	3,088 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firefighter SVG files

← Firefighter hydrant All 14 firefighters Firefighter Maltese cross, blank →