Firefighter extinguisher SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A hand extinguisher: a round-shouldered cylinder with a flame on its label, a squeeze handle, a gauge and a short hose ending in a horn. A clear sign for the place where one is kept.
What is in the file
| Size | 70 × 100 mm (2.76 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 667 mm at this size |
| Narrowest part | 3.3 mm at this size |
| Nodes | 78 curve and line segments |
| Also found as | Fire extinguisher SVG |
Measured from the file. PNG: 1,427 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.7 × 1 in (18 × 25 mm) | 0.84 mm | 169 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 1.4 × 2 in (36 × 51 mm) | 1.7 mm | 339 mm | 35 | Vinyl, card and thin sheet |
| 2.11 × 3 in (53 × 76 mm) | 2.5 mm | 508 mm | 15 | Vinyl, card and thin sheet |
| 2.81 × 4 in (71 × 102 mm) | 3.4 mm | 678 mm | 8 | Any material, including 3 mm wood and acrylic |
| 4.21 × 6 in (107 × 152 mm) | 5 mm | 1,017 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.62 × 8 in (143 × 203 mm) | 6.7 mm | 1,355 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.42 × 12 in (214 × 305 mm) | 10 mm | 2,033 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More firefighter SVG files
-
Layered firefighter helmet in three colours Layered · 3 pieces
-
Firefighter helmet from the front Solid · one piece
-
Firefighter helmet from the side Solid · one piece
-
Firefighter axe Solid · one piece
-
Firefighter axes crossed Solid · one piece
-
Firefighter hydrant Solid · one piece
-
Firefighter fire engine Solid · one piece
-
Firefighter Maltese cross, blank Solid · one piece
← Firefighter hose and nozzle All 14 firefighters Layered firefighter helmet in three colours →