Free Faith Over Fear SVG

Faith Over Fear stencil plate SVG

Faith Over Fear stencil plate, as a solid black shape — Faith Over Fear stencil plate. The preview is the SVG file itself.

A rounded plate with “FAITH OVER FEAR” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.7 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	1,338 mm at this size
Narrowest part	1.7 mm at this size
Nodes	293 curve and line segments

Measured from the file. PNG: 2,000 × 1,394 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 17 mm)	0.43 mm	340 mm	130	Too fine for most machines
2 × 1.37 in (51 × 35 mm)	0.86 mm	680 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.06 in (76 × 52 mm)	1.3 mm	1,020 mm	15	Vinyl, card and thin sheet
4 × 2.74 in (102 × 70 mm)	1.7 mm	1,359 mm	8	Vinyl, card and thin sheet
6 × 4.11 in (152 × 104 mm)	2.6 mm	2,039 mm	2	Vinyl, card and thin sheet
8 × 5.48 in (203 × 139 mm)	3.5 mm	2,719 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.22 in (305 × 209 mm)	5.2 mm	4,078 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith Over Fear SVG files

← Faith Over Fear outline lettering All 12 Faith Over Fear designs Faith Over Fear with a drop shadow →