Free Faith Over Fear SVG

Faith Over Fear in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Faith Over Fear in Pacifico, as a solid black shape
Faith Over Fear in Pacifico. The preview is the SVG file itself.

“Faith Over Fear” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 59 mm (3.94 × 2.3 in), scales to any size
Pieces7 separate pieces
Outlines to cut15: 7 outer edges and 8 cut-outs
Cut length879 mm at this size
Narrowest part0.8 mm at this size
Nodes305 curve and line segments

Measured from the file. PNG: 2,000 × 1,202 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.2 mm223 mm150Too fine for most machines
2 × 1.17 in (51 × 30 mm)0.41 mm447 mm40Too fine for most machines
3 × 1.75 in (76 × 45 mm)0.61 mm670 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.34 in (102 × 59 mm)0.81 mm893 mm8Fine detail: vinyl and paper only, weed with care
6 × 3.51 in (152 × 89 mm)1.2 mm1,340 mm3Vinyl, card and thin sheet
8 × 4.68 in (203 × 119 mm)1.6 mm1,786 mm2Vinyl, card and thin sheet
12 × 7.02 in (305 × 178 mm)2.4 mm2,679 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith Over Fear SVG files

← Faith Over Fear with a cross All 13 Faith Over Fear designs Faith Over Fear in Lobster →