Free Faith Over Fear SVG

Faith Over Fear in Alfa Slab One SVG

Faith Over Fear in Alfa Slab One, as a solid black shape — Faith Over Fear in Alfa Slab One. The preview is the SVG file itself.

“Faith Over Fear” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 39 mm (3.94 × 1.52 in), scales to any size
Pieces	14 separate pieces
Outlines to cut	19: 14 outer edges and 5 cut-outs
Cut length	755 mm at this size
Narrowest part	2 mm at this size
Nodes	422 curve and line segments

Measured from the file. PNG: 2,000 × 821 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.39 in (25 × 10 mm)	0.51 mm	192 mm	200	Fine detail: vinyl and paper only, weed with care
2 × 0.77 in (51 × 20 mm)	1 mm	384 mm	60	Vinyl, card and thin sheet
3 × 1.16 in (76 × 29 mm)	1.5 mm	575 mm	24	Vinyl, card and thin sheet
4 × 1.55 in (102 × 39 mm)	2 mm	767 mm	12	Vinyl, card and thin sheet
6 × 2.32 in (152 × 59 mm)	3 mm	1,151 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.1 in (203 × 79 mm)	4.1 mm	1,534 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.64 in (305 × 118 mm)	6.1 mm	2,301 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith Over Fear SVG files

← Faith Over Fear in Lilita One All 12 Faith Over Fear designs Faith Over Fear in Amatic SC →