Free Faith Over Fear SVG

Faith Over Fear in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Faith Over Fear in Amatic SC, as a solid black shape
Faith Over Fear in Amatic SC. The preview is the SVG file itself.

“Faith Over Fear” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 76 mm (3.94 × 3 in), scales to any size
Pieces13 separate pieces
Outlines to cut18: 13 outer edges and 5 cut-outs
Cut length1,283 mm at this size
Narrowest part1.2 mm at this size
Nodes418 curve and line segments

Measured from the file. PNG: 2,000 × 1,542 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.3 mm326 mm120Too fine for most machines
2 × 1.52 in (51 × 39 mm)0.61 mm652 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.29 in (76 × 58 mm)0.91 mm978 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.05 in (102 × 77 mm)1.2 mm1,304 mm6Vinyl, card and thin sheet
6 × 4.57 in (152 × 116 mm)1.8 mm1,955 mm2Vinyl, card and thin sheet
8 × 6.1 in (203 × 155 mm)2.4 mm2,607 mm1Vinyl, card and thin sheet
12 × 9.14 in (305 × 232 mm)3.7 mm3,911 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith Over Fear SVG files

← Faith Over Fear in Alfa Slab One All 13 Faith Over Fear designs Faith Over Fear in block capitals →