Free Faith Over Fear SVG

Faith Over Fear in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Faith Over Fear in Lilita One, as a solid black shape
Faith Over Fear in Lilita One. The preview is the SVG file itself.

“Faith Over Fear” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 44 mm (3.94 × 1.74 in), scales to any size
Pieces14 separate pieces
Outlines to cut19: 14 outer edges and 5 cut-outs
Cut length724 mm at this size
Narrowest part2.5 mm at this size
Nodes254 curve and line segments

Measured from the file. PNG: 2,000 × 927 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.64 mm184 mm190Fine detail: vinyl and paper only, weed with care
2 × 0.88 in (51 × 22 mm)1.3 mm368 mm55Vinyl, card and thin sheet
3 × 1.33 in (76 × 34 mm)1.9 mm552 mm21Vinyl, card and thin sheet
4 × 1.77 in (102 × 45 mm)2.5 mm736 mm12Vinyl, card and thin sheet
6 × 2.65 in (152 × 67 mm)3.8 mm1,103 mm4Any material, including 3 mm wood and acrylic
8 × 3.54 in (203 × 90 mm)5.1 mm1,471 mm3Any material, including 3 mm wood and acrylic
12 × 5.3 in (305 × 135 mm)7.6 mm2,207 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith Over Fear SVG files

← Faith Over Fear in Kaushan Script All 13 Faith Over Fear designs Faith Over Fear in Alfa Slab One →