Free fairy SVG

Tooth fairy tooth with wings SVG

Tooth fairy tooth with wings, as a solid black shape
Tooth fairy tooth with wings. The preview is the SVG file itself.

A smiling tooth with two roots, a small pair of wings and a three-pointed crown: the tooth fairy as a character. For tooth pillows, door hangers and little bags for a lost tooth.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 97 mm (3.94 × 3.81 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length639 mm at this size
Narrowest part4.1 mm at this size
Nodes174 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,940 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)1 mm162 mm100Vinyl, card and thin sheet
2 × 1.94 in (51 × 49 mm)2.1 mm325 mm25Vinyl, card and thin sheet
3 × 2.91 in (76 × 74 mm)3.1 mm487 mm9Any material, including 3 mm wood and acrylic
4 × 3.88 in (102 × 98 mm)4.2 mm649 mm4Any material, including 3 mm wood and acrylic
6 × 5.81 in (152 × 148 mm)6.2 mm974 mm2Any material, including 3 mm wood and acrylic
8 × 7.75 in (203 × 197 mm)8.3 mm1,298 mm1Any material, including 3 mm wood and acrylic
12 × 11.63 in (305 × 295 mm)12 mm1,948 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fairy SVG files

← Fairy house with a crooked roof All 15 fairies Fairy wings outline →