Free fairy SVG

Flying fairy SVG

Flying fairy, as a solid black shape — Flying fairy. The preview is the SVG file itself.

A fairy in flight, leaning forward with her wand stretched ahead, her legs trailing and both wings raised. Set her at an angle above a name or a row of flowers.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.93 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	681 mm at this size
Narrowest part	2.2 mm at this size
Nodes	247 curve and line segments

Measured from the file. PNG: 2,000 × 1,510 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	0.56 mm	173 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.49 in (51 × 38 mm)	1.1 mm	346 mm	35	Vinyl, card and thin sheet
3 × 2.24 in (76 × 57 mm)	1.7 mm	519 mm	15	Vinyl, card and thin sheet
4 × 2.98 in (102 × 76 mm)	2.2 mm	692 mm	6	Vinyl, card and thin sheet
6 × 4.47 in (152 × 114 mm)	3.4 mm	1,038 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.96 in (203 × 151 mm)	4.5 mm	1,384 mm	1	Any material, including 3 mm wood and acrylic
12 × 8.94 in (305 × 227 mm)	6.7 mm	2,076 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fairy SVG files

← Fairy silhouette with a wand All 15 fairies Fairy sitting on a crescent moon →