Free fairy SVG

Fairy house with a crooked roof SVG

Fairy house with a crooked roof, as a solid black shape
Fairy house with a crooked roof. The preview is the SVG file itself.

A small round cottage under a tall roof that bends over at the tip, with an arched door, a round window, a chimney and two rows of shingles cut into the roof. For lanterns, shadow boxes and garden stakes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size87 × 100 mm (3.43 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length824 mm at this size
Narrowest part2.3 mm at this size
Nodes269 curve and line segments

Measured from the file. PNG: 1,752 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.58 mm209 mm110Fine detail: vinyl and paper only, weed with care
1.74 × 2 in (44 × 51 mm)1.2 mm419 mm30Vinyl, card and thin sheet
2.61 × 3 in (66 × 76 mm)1.8 mm628 mm12Vinyl, card and thin sheet
3.48 × 4 in (88 × 102 mm)2.3 mm837 mm6Vinyl, card and thin sheet
5.23 × 6 in (133 × 152 mm)3.5 mm1,256 mm2Any material, including 3 mm wood and acrylic
6.97 × 8 in (177 × 203 mm)4.7 mm1,674 mm1Any material, including 3 mm wood and acrylic
10.45 × 12 in (265 × 305 mm)7 mm2,512 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fairy SVG files

← Fairy door with a round window All 15 fairies Tooth fairy tooth with wings →