Free Fab Boo Lous SVG

Fab Boo Lous in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fab Boo Lous in Pacifico, as a solid black shape
Fab Boo Lous in Pacifico. The preview is the SVG file itself.

“Fab Boo Lous” set in Pacifico, a bold brush script, on 3 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size53 × 100 mm (2.07 × 3.94 in), scales to any size
Pieces5 separate pieces
Outlines to cut11: 5 outer edges and 6 cut-outs
Cut length740 mm at this size
Narrowest part1.7 mm at this size
Nodes363 curve and line segments

Measured from the file. PNG: 1,088 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.53 × 1 in (13 × 25 mm)0.43 mm188 mm160Too fine for most machines
1.05 × 2 in (27 × 51 mm)0.86 mm376 mm45Fine detail: vinyl and paper only, weed with care
1.58 × 3 in (40 × 76 mm)1.3 mm564 mm18Vinyl, card and thin sheet
2.1 × 4 in (53 × 102 mm)1.7 mm752 mm10Vinyl, card and thin sheet
3.16 × 6 in (80 × 152 mm)2.6 mm1,128 mm3Vinyl, card and thin sheet
4.21 × 8 in (107 × 203 mm)3.5 mm1,504 mm2Any material, including 3 mm wood and acrylic
6.31 × 12 in (160 × 305 mm)5.2 mm2,256 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fab Boo Lous SVG files

← Fab Boo Lous with a drop shadow All 12 Fab Boo Lous designs Fab Boo Lous in Lobster →