Free Fab Boo Lous SVG

Fab Boo Lous with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fab Boo Lous with stars, as a solid black shape — Fab Boo Lous with stars. The preview is the SVG file itself.

“Fab Boo Lous” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size	34 × 100 mm (1.35 × 3.94 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	18: 12 outer edges and 6 cut-outs
Cut length	771 mm at this size
Narrowest part	0.9 mm at this size
Nodes	367 curve and line segments

Measured from the file. PNG: 735 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.34 × 1 in (9 × 25 mm)	0.23 mm	196 mm	220	Too fine for most machines
0.68 × 2 in (17 × 51 mm)	0.46 mm	392 mm	65	Too fine for most machines
1.03 × 3 in (26 × 76 mm)	0.69 mm	588 mm	27	Fine detail: vinyl and paper only, weed with care
1.37 × 4 in (35 × 102 mm)	0.91 mm	783 mm	14	Fine detail: vinyl and paper only, weed with care
2.05 × 6 in (52 × 152 mm)	1.4 mm	1,175 mm	5	Vinyl, card and thin sheet
2.74 × 8 in (69 × 203 mm)	1.8 mm	1,567 mm	4	Vinyl, card and thin sheet
4.1 × 12 in (104 × 305 mm)	2.7 mm	2,350 mm	2	Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fab Boo Lous SVG files

← Fab Boo Lous in script and capitals All 12 Fab Boo Lous designs Fab Boo Lous outline lettering →