Free Fab Boo Lous SVG

Fab Boo Lous in script and capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fab Boo Lous in script and capitals, as a solid black shape
Fab Boo Lous in script and capitals. The preview is the SVG file itself.

“Fab” in Pacifico script over “BOO LOUS” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

What is in the file

Size55 × 100 mm (2.17 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut17: 9 outer edges and 8 cut-outs
Cut length1,224 mm at this size
Narrowest part2.2 mm at this size
Nodes221 curve and line segments

Measured from the file. PNG: 1,137 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.55 × 1 in (14 × 25 mm)0.56 mm311 mm160Fine detail: vinyl and paper only, weed with care
1.1 × 2 in (28 × 51 mm)1.1 mm622 mm45Vinyl, card and thin sheet
1.65 × 3 in (42 × 76 mm)1.7 mm933 mm18Vinyl, card and thin sheet
2.2 × 4 in (56 × 102 mm)2.2 mm1,244 mm10Vinyl, card and thin sheet
3.31 × 6 in (84 × 152 mm)3.4 mm1,865 mm3Any material, including 3 mm wood and acrylic
4.41 × 8 in (112 × 203 mm)4.5 mm2,487 mm2Any material, including 3 mm wood and acrylic
6.61 × 12 in (168 × 305 mm)6.7 mm3,731 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fab Boo Lous SVG files

← Fab Boo Lous in block capitals All 12 Fab Boo Lous designs Fab Boo Lous with stars →