Free Fab Boo Lous SVG

Fab Boo Lous in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fab Boo Lous in Lobster, as a solid black shape
Fab Boo Lous in Lobster. The preview is the SVG file itself.

“Fab Boo Lous” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size45 × 100 mm (1.78 × 3.94 in), scales to any size
Pieces6 separate pieces
Outlines to cut12: 6 outer edges and 6 cut-outs
Cut length788 mm at this size
Narrowest part1.1 mm at this size
Nodes221 curve and line segments

Measured from the file. PNG: 946 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.45 × 1 in (11 × 25 mm)0.28 mm200 mm180Too fine for most machines
0.9 × 2 in (23 × 51 mm)0.56 mm400 mm55Fine detail: vinyl and paper only, weed with care
1.36 × 3 in (34 × 76 mm)0.84 mm600 mm21Fine detail: vinyl and paper only, weed with care
1.81 × 4 in (46 × 102 mm)1.1 mm801 mm12Vinyl, card and thin sheet
2.71 × 6 in (69 × 152 mm)1.7 mm1,201 mm4Vinyl, card and thin sheet
3.62 × 8 in (92 × 203 mm)2.2 mm1,601 mm3Vinyl, card and thin sheet
5.42 × 12 in (138 × 305 mm)3.4 mm2,402 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fab Boo Lous SVG files

← Fab Boo Lous in Pacifico All 13 Fab Boo Lous designs Fab Boo Lous in Kaushan Script →