Free Fab Boo Lous SVG

Fab Boo Lous with a ghost SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fab Boo Lous with a ghost, as a solid black shape
Fab Boo Lous with a ghost. The preview is the SVG file itself.

“Fab Boo Lous” with a ghost above the words: the first line in Pacifico script, the rest in narrow capitals, the lines made the same width. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size40 × 100 mm (1.56 × 3.94 in), scales to any size
Pieces10 separate pieces
Outlines to cut21: 10 outer edges and 11 cut-outs
Cut length1,006 mm at this size
Narrowest part1.4 mm at this size
Nodes247 curve and line segments

Measured from the file. PNG: 838 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.4 × 1 in (10 × 25 mm)0.36 mm256 mm200Too fine for most machines
0.79 × 2 in (20 × 51 mm)0.71 mm511 mm60Fine detail: vinyl and paper only, weed with care
1.19 × 3 in (30 × 76 mm)1.1 mm767 mm24Vinyl, card and thin sheet
1.58 × 4 in (40 × 102 mm)1.4 mm1,022 mm12Vinyl, card and thin sheet
2.38 × 6 in (60 × 152 mm)2.1 mm1,533 mm4Vinyl, card and thin sheet
3.17 × 8 in (80 × 203 mm)2.8 mm2,044 mm3Vinyl, card and thin sheet
4.75 × 12 in (121 × 305 mm)4.3 mm3,066 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fab Boo Lous SVG files

← Fab Boo Lous with a drop shadow All 13 Fab Boo Lous designs Fab Boo Lous in Pacifico →