Free elephant SVG

Mother and baby elephant SVG

Mother and baby elephant, as a solid black shape — Mother and baby elephant. The preview is the SVG file itself.

A mother elephant with her calf walking behind, holding her tail in its trunk. The two are welded at the tail, so they cut as one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 40 mm (3.94 × 1.57 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	569 mm at this size
Narrowest part	1.6 mm at this size
Nodes	259 curve and line segments

Measured from the file. PNG: 2,000 × 846 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.4 in (25 × 10 mm)	0.41 mm	145 mm	200	Too fine for most machines
2 × 0.8 in (51 × 20 mm)	0.81 mm	289 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.2 in (76 × 30 mm)	1.2 mm	434 mm	24	Vinyl, card and thin sheet
4 × 1.6 in (102 × 41 mm)	1.6 mm	578 mm	12	Vinyl, card and thin sheet
6 × 2.4 in (152 × 61 mm)	2.4 mm	867 mm	4	Vinyl, card and thin sheet
8 × 3.2 in (203 × 81 mm)	3.3 mm	1,156 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.8 in (305 × 122 mm)	4.9 mm	1,734 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More elephant SVG files

← Sitting baby elephant All 16 elephants Elephant couple with a heart →