Free dog bone SVG

Dog bone outline SVG

Dog bone outline, drawn as a line — Dog bone outline. The preview is the SVG file itself.

The classic bone as one even line about 2 mm wide in a closed loop. For colouring pages, foil, engraving, pen plotters and a border round a short name.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 52 mm (3.94 × 2.05 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	614 mm at this size
Narrowest part	2.2 mm at this size
Nodes	100 curve and line segments
Symmetry	2-fold rotation and mirror

Measured from the file. PNG: 2,000 × 1,079 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.52 in (25 × 13 mm)	0.56 mm	156 mm	160	Fine detail: vinyl and paper only, weed with care
2 × 1.04 in (51 × 26 mm)	1.1 mm	312 mm	45	Vinyl, card and thin sheet
3 × 1.56 in (76 × 40 mm)	1.7 mm	468 mm	18	Vinyl, card and thin sheet
4 × 2.08 in (102 × 53 mm)	2.2 mm	624 mm	10	Vinyl, card and thin sheet
6 × 3.13 in (152 × 79 mm)	3.4 mm	936 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.17 in (203 × 106 mm)	4.5 mm	1,248 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.25 in (305 × 159 mm)	6.7 mm	1,871 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog bone SVG files

← Chunky dog bone All 15 dog bones Dog bone name frame →