Free dog bone SVG

Dog bone with a paw print SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dog bone with a paw print, as a solid black shape
Dog bone with a paw print. The preview is the SVG file itself.

The classic bone with a paw print cut out of the middle: one pad and four toes. Back it with a second colour, or leave it open on a treat jar label.

What is in the file

Size100 × 56 mm (3.94 × 2.2 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length427 mm at this size
Narrowest part1 mm at this size
Nodes96 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,150 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.25 mm108 mm160Too fine for most machines
2 × 1.12 in (51 × 28 mm)0.51 mm217 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.67 in (76 × 43 mm)0.76 mm325 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.23 in (102 × 57 mm)1 mm434 mm10Vinyl, card and thin sheet
6 × 3.35 in (152 × 85 mm)1.5 mm651 mm3Vinyl, card and thin sheet
8 × 4.46 in (203 × 113 mm)2 mm868 mm2Vinyl, card and thin sheet
12 × 6.7 in (305 × 170 mm)3 mm1,301 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog bone SVG files

← Dog bone tag All 15 dog bones Dog bone with a heart →