Free dog bone SVG

Dog bone tag SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dog bone tag, as a solid black shape
Dog bone tag. The preview is the SVG file itself.

A bone-shaped pet tag with a loop on top for a split ring. Cut it at 35 to 45 mm wide from acrylic, leather or engraving metal and add a name and a phone number.

What is in the file

Size100 × 60 mm (3.94 × 2.34 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length349 mm at this size
Narrowest part3.1 mm at this size
Nodes60 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,221 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.79 mm89 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.19 in (51 × 30 mm)1.6 mm177 mm40Vinyl, card and thin sheet
3 × 1.78 in (76 × 45 mm)2.4 mm266 mm18Vinyl, card and thin sheet
4 × 2.38 in (102 × 60 mm)3.1 mm355 mm8Any material, including 3 mm wood and acrylic
6 × 3.57 in (152 × 91 mm)4.7 mm532 mm3Any material, including 3 mm wood and acrylic
8 × 4.76 in (203 × 121 mm)6.3 mm709 mm2Any material, including 3 mm wood and acrylic
12 × 7.14 in (305 × 181 mm)9.4 mm1,064 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog bone SVG files

← Dog bone name frame All 15 dog bones Dog bone with a paw print →