Free dog bone SVG

Split dog bone for a name SVG

Split dog bone for a name, as a solid black shape
Split dog bone for a name. The preview is the SVG file itself.

The bone cut in two along its length with a clear band between the halves for a name. It comes as two pieces: keep them on the transfer tape to hold the spacing.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 59 mm (3.94 × 2.32 in), scales to any size
Pieces2 separate pieces
Outlines to cut2 outlines
Cut length482 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes39 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,210 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)Over 1.5 mm122 mm150Vinyl, card and thin sheet
2 × 1.18 in (51 × 30 mm)Over 3 mm245 mm40Any material, including 3 mm wood and acrylic
3 × 1.77 in (76 × 45 mm)Over 4.6 mm367 mm18Any material, including 3 mm wood and acrylic
4 × 2.36 in (102 × 60 mm)Over 6.1 mm490 mm8Any material, including 3 mm wood and acrylic
6 × 3.53 in (152 × 90 mm)Over 9.1 mm735 mm3Any material, including 3 mm wood and acrylic
8 × 4.71 in (203 × 120 mm)Over 12 mm979 mm2Any material, including 3 mm wood and acrylic
12 × 7.07 in (305 × 180 mm)Over 18 mm1,469 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog bone SVG files

← Dog bone with a heart All 15 dog bones Crossed dog bones →