Free distressed texture SVG

Splatter thrown to one side SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Splatter thrown to one side, as a solid black shape
Splatter thrown to one side. The preview is the SVG file itself.

Paint that landed at an angle: a small body with its longest rays and its trail of drops all thrown out to one side. Good for the corner of a design.

What is in the file

Size100 × 88 mm (3.94 × 3.47 in), scales to any size
Pieces43 separate pieces
Outlines to cut44: 43 outer edges and 1 cut-out
Cut length811 mm at this size
Smallest mark1.2 mm at this size
Thinnest wall between cut-outs0.8 mm at this size
Nodes263 curve and line segments

Measured from the file. PNG: 2,000 × 1,773 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightSmallest markCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)0.3 mm206 mm110Too fine for most machines
2 × 1.76 in (51 × 45 mm)0.61 mm412 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.65 in (76 × 67 mm)0.91 mm618 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.53 in (102 × 90 mm)1.2 mm824 mm6Vinyl, card and thin sheet
6 × 5.29 in (152 × 134 mm)1.8 mm1,236 mm2Vinyl, card and thin sheet
8 × 7.06 in (203 × 179 mm)2.4 mm1,648 mm1Vinyl, card and thin sheet
12 × 10.58 in (305 × 269 mm)3.7 mm2,472 mm1Any material, including 3 mm wood and acrylic

The smallest mark is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More distressed texture SVG files

← Paint splat All 18 distressed textures Paint drips →