Free crown SVG

Princess crown with a heart SVG

Princess crown with a heart, as a solid black shape
Princess crown with a heart. The preview is the SVG file itself.

Five points with a pearl on each and softly rounded dips between them, a large heart cut from the middle and a teardrop each side of it. The lower edge is scalloped, with a gem in every scallop.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 68 mm (3.94 × 2.69 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length670 mm at this size
Narrowest part1.5 mm at this size
Nodes122 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,388 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.68 in (25 × 17 mm)0.38 mm170 mm130Too fine for most machines
2 × 1.36 in (51 × 35 mm)0.76 mm340 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.05 in (76 × 52 mm)1.1 mm511 mm15Vinyl, card and thin sheet
4 × 2.73 in (102 × 69 mm)1.5 mm681 mm8Vinyl, card and thin sheet
6 × 4.09 in (152 × 104 mm)2.3 mm1,021 mm2Vinyl, card and thin sheet
8 × 5.46 in (203 × 139 mm)3 mm1,361 mm2Any material, including 3 mm wood and acrylic
12 × 8.18 in (305 × 208 mm)4.6 mm2,042 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crown SVG files

← Queen crown with leaf points All 15 crowns Prince crown with five equal points →