Free crown SVG

Princess tiara with a heart SVG

Princess tiara with a heart, drawn as a line
Princess tiara with a heart. The preview is the SVG file itself.

A heart stands at the middle of a curved band with three round loops stepping down on each side. A small solid heart sits inside the open one.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 49 mm (3.94 × 1.93 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length892 mm at this size
Narrowest part1.3 mm at this size
Nodes208 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,021 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 12 mm)0.33 mm227 mm170Too fine for most machines
2 × 0.98 in (51 × 25 mm)0.66 mm453 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.47 in (76 × 37 mm)0.99 mm680 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.96 in (102 × 50 mm)1.3 mm906 mm10Vinyl, card and thin sheet
6 × 2.95 in (152 × 75 mm)2 mm1,359 mm3Vinyl, card and thin sheet
8 × 3.93 in (203 × 100 mm)2.6 mm1,813 mm2Vinyl, card and thin sheet
12 × 5.89 in (305 × 150 mm)4 mm2,719 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crown SVG files

← Tiara with seven pointed loops All 15 crowns Crown outline →