Free crown SVG

Layered crown in gold, red and pearl SVG

Layered crown in gold, red and pearl, in layered colours
Layered crown in gold, red and pearl. The preview is the SVG file itself.

A tall crown in three layers: a red backing, a gold crown with gems and teardrops cut out so the red shows through, and five pearls for the tips.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 87 mm (3.94 × 3.42 in), scales to any size
Pieces7 separate pieces
Outlines to cut17: 7 outer edges and 10 cut-outs
Cut length1,703 mm at this size
Narrowest part1.4 mm at this size
Nodes132 curve and line segments
SymmetryMirror
Layers3: layer 1 backing, layer 2 crown and layer 3 pearls

Measured from the file. PNG: 2,000 × 1,748 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.87 in (25 × 22 mm)0.36 mm433 mm110Too fine for most machines
2 × 1.74 in (51 × 44 mm)0.71 mm865 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.61 in (76 × 66 mm)1.1 mm1,298 mm12Vinyl, card and thin sheet
4 × 3.48 in (102 × 88 mm)1.4 mm1,730 mm6Vinyl, card and thin sheet
6 × 5.21 in (152 × 132 mm)2.1 mm2,595 mm2Vinyl, card and thin sheet
8 × 6.95 in (203 × 177 mm)2.8 mm3,460 mm1Vinyl, card and thin sheet
12 × 10.43 in (305 × 265 mm)4.3 mm5,191 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crown SVG files

← Crown outline All 15 crowns Classic crown with five points →